To celebrate our 20th anniversary use code: 20AMSALE on select products now through May 31st, 2024!
Summer Hours: Mon. - Thurs. 8:00 AM - 5:00 PM, CLOSED FRIDAYS through 8/2/24.
413 results
category
Bolt Pattern
- 0.317 in. holes on a 3 in. Diameter Circle (1)
- 12 holes on 1.875 in. dia. bolt circle (1)
- 4 holes on 16 mm dia. bolt circle (3)
- 4 holes on 2 in. dia. bolt circle (2)
- 4 holes on 36 mm dia. bolt circle (1)
- 6 holes on 1.875 in. dia. bolt circle (20)
- 6 holes on 3.25 in. dia. bolt circle (1)
- 6 holes on a 1 in. dia. bolt circle (2)
- 8 holes on 2 in. dia. bolt circle (1)
Bore
- 0.125 in. [3.2 mm] (1/8) Round (3)
- 0.197 in. [5 mm] Hex (7)
- 0.236 in. [6 mm] Bearing Bore (1)
- 0.236 in. [6 mm] D (2)
- 0.236 in. [6 mm] Round (3)
- 0.236 in. [6.0 mm] Round (1)
- 0.240 in. [6.1 mm] Round (1)
- 0.313 in. [8 mm] (5/16) NUB Bore (6)
- 0.313 in. [8 mm] (5/16) Round (4)
- 0.375 in. [9.5 mm] (3/8) Hex (13)
- 0.375 in. [9.5 mm] (3/8) Round (1)
- 0.400 in. [10.2 mm] Round (1)
- 0.472 in. [12 mm] Round (1)
- 0.500 in. [12.7 mm] (1/2) Hex (23)
- 0.500 in. [12.7 mm] (1/2) Round (1)
- 0.500 in. [12.7] Hex (1)
- 0.551 in. [14 mm] Hex (1)
- 0.591 in. [15.0 mm] Round (1)
- 0.693 in. [17.6 mm] Round (1)
- 0.750 in. [19.1 mm] (3/4) Round (1)
- 0.875 in. [22.2 mm] (7/8) Round (1)
- 1.125 in. [28.6 mm] (1-1/8) Bearing Bore (16)
- 1.500 in. [38.1 mm] (1-1/2) Round (1)
- 1.510 in. [38.4 mm] Round (1)
- 24T Servo Spline (2)
- C24T Servo Spline (1)
- Falcon Spline (2)
Diameter
Finish
Gauge
Head
Material
Motor Input
Teeth
- 04 (1)
- 100 (2)
- 104 (1)
- 105 (2)
- 106 (1)
- 107 (1)
- 110 (2)
- 115 (2)
- 117 (1)
- 12 (2)
- 120 (2)
- 121 (1)
- 125 (2)
- 130 (2)
- 131 (1)
- 135 (2)
- 136 (1)
- 14 (2)
- 140 (2)
- 145 (2)
- 15 (2)
- 150 (2)
- 151 (1)
- 152 (1)
- 16 (1)
- 160 (2)
- 167 (1)
- 17 (2)
- 170 (2)
- 18 (1)
- 180 (2)
- 19 (2)
- 190 (2)
- 20 (3)
- 200 (2)
- 21 (1)
- 225 (2)
- 24 (3)
- 25 (1)
- 250 (2)
- 28 (1)
- 29 (1)
- 30 (4)
- 32 (2)
- 34 (1)
- 35 (5)
- 36 (1)
- 38 (1)
- 40 (5)
- 43 (1)