iR3 Creative Announces the Creation and Support of Robot in 3 Days!

Featured

20121223-085355.jpg

The founders of iR3 Creative are proud to announce the creation and support of Robot in 3 days.

Robot in 3 days is an organization dedicated to inspiring youth to pursue careers in science technology engineering and math. The purpose is to be one part entertainment and blog and one part educational.

Check them out at Robotin3days.com

Oh and make sure to follow on twitter @robotin3days and like on Facebook.

Modulox Channel Ideas

Featured

Now that the Modulox Channel is officially available on AndyMark.com we felt we should share some of the ways we think it could be used. The channel is a 6 ft long slotted utility piece of fury! There is very little this guy can’t do when coupled with the Modulox kits and components! You’ve already seen how it can be used to create the basketball shooter to end all shooters!

It can be chopped in half to form a drivetrain rails for a 6-8 wheel tank with lowered center wheel or outside Mechanum.

Oh, or it can be chopped into 6 pieces for 3 gearboxes all capable of gear ratio of around 212:1.

Let us know what you think! Drop us a line in the form below and if you’ve got a cool idea or use that you’d like to share send it our way. Who knows if we like it enough we may just feature it on the site!

Your Name (required)

Your Email (required)

Subject

Your Message

PG71 Modulox Motor Mount!

PG-71 MOUNT BLOCK

PG-71 STP FILE (Right Click Save As)

We are proud to introduce a Modulox mounting solution for the PG71 gear motor. Thou asketh and thou shall receiveth.

This little aluminum nugget from the engineering gods (not actually calling ourselves engineering gods, more like the messengers) adds a few more motor options to your Modulox kits for 2012.

The beastly PG71 gear motor from AndyMark Inc. combines a 71:1 planetary gearbox with a RS-775 motor. A mod is also available to use a RS-500 motor.

But, you ask, why would I need more gearing than 71:1? Maybe you need more, maybe you need less, maybe you need a modular mounting solution with the adjustability to optimize your design. Wedk (we don’t know) and wedc (we don’t care). The point is that this little block is going to take you on an adventure of a lifetime and we’re just happy to help make that dream come true.

Currently, we won’t be selling this as an actual product which is why we’ve made the stp and drawing available. To make your own all you will need is an extended blank block and the appropriate moding tools. Worst case you can send the stp over to FirstCut.com and have your part within a few days.

Check back frequently because we change our minds daily and who knows, maybe we’ll have this guy on the shelves soon. For now check out the pretty pics and cad files. Let us know what you think in the form below!

Your Name (required)

Your Email (required)

Subject

Your Message

Modulox Shooter Trajectory Testing!

We’ve designed this basket ball launcher to test shooting concepts on the fly! Building off our last post seen here: Modulox Shooter (Updated with BOM!)

We’ve decided to test some of the best trajectories for long distance shots. Early testing is showing that line drives are difficult to make bouncing off the backboard. Higher trajectory shots are proving to have a higher % of makes because they strike the backboard with less forward velocity.The top of the shooter is 57″ and distance measurements were taken from the front of the shooter to the backboard.

Also notice that we have turned our shooter horizontal for the most recent tests. We have not yet determined the advantages or disadvantages of either configuration.

If you’re curious about how trajectory calculations work check out the great articles and calculators here:

Hyper Physics Trajectory Calculator

Wikipedia Trajectory Article

Note: While iR3 Creative offers Modulox in kits and as a product line, the Modulox Shooter is not intended to be a product and is simply a reference tool and community resource. Please make sure any and all design choices are entirely within competition rules and fit your teams design intent.

If you like this project and want to see more make sure to follow us on Facebook and Twitter @iR3Creative . Check out the news section for some of our past work and feel free to contact us below or email at info@iR3Creative.com

Your Name (required)

Your Email (required)

Subject

Your Message

Modulox Shooter (Updated with Simplified BOM!)

Check out the shooters trajectory tests!

The Modulox Shooter is a fully functional ball shooter that can allow you to prototype, test and finalize launcher design concepts. The Modulox design allows you to quickly change wheel rpm and gearing as well as wheel clamping force and distance to optimize your component and design choices. This design is robust enough to serve as a final solution but modular enough to answer all your questions on the test bench. Make sure to get your Modulox components at AndyMark.Com/Modulox or click the picture below.

This ball shooter was primarily built from a Modulox Channel, Lunchbox Kit, and a few additional Not in a Box components and AndyMark parts. See the full parts list in the drawing below! If you have questions about what motors can be used with Modulox kits check our Motors for Modulox Post!

Check out the BOM Drawing for component list ( We apologize for some items appearing twice with two separate quantities, the part total is correct and we are working to consolidate the list!! )

Modulox Ball Launcher Drawing and BOM

MODULOX BALL LAUNCHER STEP FILE (Right Click – Save As)

Updated! We’ve simplified the list of components so that it’s a bit easier to order, follow the link to buy.To build a similar shooter here’s what you’ll need:

Option 1:

Option 2 (With plenty of parts left over for further prototyping!):

20120109-140117.jpg

Note: While iR3 Creative offers Modulox in kits and as a product line, the Modulox Shooter is not intended to be a product and is simply a reference tool and community resource. Please make sure any and all design choices are entirely within competition rules and fit your teams design intent. We are excited to see how everyone improves the design over the course of the season.

If you like this project and want to see more make sure to follow us on Facebook and Twitter @iR3Creative . Check out the news section for some of our past work and feel free to contact us below or email at info@iR3Creative.com

Your Name (required)

Your Email (required)

Subject

Your Message